Wobbly Otter Outdoors Videos

In Part 4, the last of the reassembly of the Morris Mule trailer is done.

Thank you for watching. Subscribe to get the best Wobbly Otter adventures, how to's, and gear reviews delivered directly to you.

The top doors are bolted in place. The trailer stabilizer bars are removed, sanded and painted with Rustoleum semi-gloss black spray paint.

The jerry can brackets and the large storage box are bolted onto the front cargo deck. The jerry cans are put into their brackets and locked into place.

The spare tire bracket is bolted onto the trailer tongue - twice. Ooops.

Check back for part 5 of our Morris Mule trailer makeover.

Check out the playlist in our YouTube channel of all the videos covering this project from beginning to end.

Following is a list of  the products used in the makeover project:

HERCULINER BED LINER

See this product on Amazon: http://amzn.to/2fgPFyw

• Trailer bed
• Fenders
• Cargo area
• Underneath: forward facing surfaces of crossbars and axle
• Brake boxes: top and forward facing surfaces, and the side of the box away from the trailer

RUSTOLEUM TRUCK BED COATING SPRAY PAINT

See this product on Amazon: http://amzn.to/2gxZMBV

• Trailer tongue
• Underside and back of crossbars underneath the trailer
• Brake boxes: trailer side and bottom surfaces, and the surface where the light goes
• Cargo storage box
• Jerry can racks

RUSTOLEUM CAMOUFLAGE SAND-COLORED SPRAY PAINT

See this product on Amazon: http://amzn.to/2gsrz5O

• All top, front, back and side trailer surfaces not otherwise painted

RUSTOLEUM SEMI GLOSS BLACK

See this product on Amazon: http://amzn.to/2gxZmvk

• Trailer stabilizer bars and rack bars

MORRIS MULE TRAILER

http://morrismule.com/

Disclosure: Some of the product links on this page are affiliate links, and at no additional cost to you, we may earn a small commission if you make a purchase after clicking through the link. By using these links you help support Wobbly Otter Outdoors. Thank you.