In Part 3, the paint has dried and reassembly of the Morris Mule trailer begins.
Thank you for watching. Subscribe to get the best Wobbly Otter adventures, how to's, and gear reviews delivered directly to you!
The tires and fenders are put on the trailer. The Herculiner on the fender brackets makes the bolts fit snuggly. A tap of the hammer pushes the bolts through. The tailgate is reattached to the trailer, along with its wiring. The brake light boxes, brake light wiring with ground wire, and the gasket for the brake light are assembled and bolted into place.
Check back for part 4 of our Morris Mule trailer makeover.
Check out the playlist in our YouTube channel of all the videos covering this project from beginning to end.
Following is a list of the products used in the makeover project:
HERCULINER BED LINER
See this product on Amazon: https://amzn.to/2fgPFyw
- Trailer bed
- Cargo area
- Underneath: forward facing surfaces of crossbars and axle
- Brake boxes: top and forward facing surfaces, and the side of the box away from the trailer
RUSTOLEUM TRUCK BED COATING SPRAY PAINT
See this product on Amazon: https://amzn.to/2gxZMBV
- Trailer tongue
- Underside and back of crossbars underneath the trailer
- Brake boxes: trailer side and bottom surfaces, and the surface where the light goes
- Cargo storage box
- Jerry can racks
RUSTOLEUM CAMOUFLAGE SAND-COLORED SPRAY PAINT
See this product on Amazon: https://amzn.to/2gsrz5O
- All top, front, back and side trailer surfaces not otherwise painted
RUSTOLEUM SEMI GLOSS BLACK
See this product on Amazon: https://amzn.to/2gxZmvk
- Trailer stabilizer bars and rack bars
MORRIS MULE TRAILER
Disclosure: Some of the product links on this page are affiliate links, and at no additional cost to you, we may earn a small commission if you make a purchase after clicking through the link. By using these links you help support Wobbly Otter Outdoors. Thank you.